IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 138 / 212

COPYLD Use the COPYLD command to copy a source logical
drive to a target logical drive. The size of the target
logical drive must be greater than or equal to the
size of the source logical drive.
Supported operating system: DOS
Command:
IPSSEND COPYLD
Controller Source Target Oparm
Replace:
Ÿ
Controller with the ServeRAID controller number
(1 to 8)
Ÿ
Source with the source logical drive number
Ÿ
Target with the target logical drive number
Ÿ
Oparm with the optional parameter,
NOPROMPT, to override the user prompt
RESTORE Use the RESTORE command to load a
configuration from a file stored on a diskette or a
hard disk drive. The configuration must be a valid
configuration file from the BACKUP option on the
IBM ServeRAID DOS Configuration Utility Program
Diskette or IPSSEND. This operation overwrites the
existing configuration information stored for the
ServeRAID adapter or controller.
Supported operating systems: Windows NT, OS/2,
NetWare, OpenServer, UnixWare, and DOS
Command:
IPSSEND RESTORE
Controller Filename Oparm
Replace:
Ÿ
Controller with the ServeRAID controller number
(1 to 8)
Ÿ
Filename with the path and file name where the
configuration is to be written
Ÿ
Oparm with the optional parameter,
NOPROMPT, to override the user prompt
128
IBM ServeRAID-3H and ServeRAID-3L Adapters