IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 137 / 212

Using the IPSSEND Program
When you run the IPSSEND program with no command-line
parameters, a list of available functions and their specific parameters
appears. All functions require a minimum set of parameters to run
the command. If you run the IPSSEND program with a specific
function but without its required parameters, specific help for that
function will appear on the monitor.
There are four basic types of IPSSEND commands:
Ÿ
Server roll-out commands
Ÿ
Error-recovery commands
Ÿ
Problem-isolation and debug commands
Ÿ
RAID configuration commands
Server Roll-Out Commands
The IPSSEND server roll-out commands include the following:
BACKUP Use the BACKUP command to save a ServeRAID
adapter or controller configuration to a diskette or to
a hard disk drive. The ServeRAID adapter or
controller configuration must be valid.
Supported operating systems: Windows NT, OS/2,
NetWare, DOS, OpenServer, and UnixWare.
Command:
IPSSEND BACKUP
Controller Filename Oparm
Replace:
Ÿ
Controller with the ServeRAID controller number
(1 to 8)
Ÿ
Filename with the path and file name where the
configuration is to be written
Ÿ
Oparm with the optional parameter,
NOPROMPT, to override the user prompt
Chapter 5. Starting and Using the Utility Programs
127