IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 131 / 212

Scanning for New Drives: You can scan for new devices attached
to the ServeRAID adapter or controller.
To scan for new drives, click on the icon on the Tool Bar or
select Scan For New Drives from the Advanced pull-down menu.
Using the Monitoring Functions
This section contains instructions for using the Administration and
Monitoring Program to monitor the ServeRAID adapter and controller
status information, event logs, logical drive information, and physical
device information.
Monitoring the Adapter Status Information
A green or red light on the screen indicates the currently active
adapter button. (Green indicates that the ServeRAID adapter or
controller is responding and red indicates that it is not responding.)
If there is more than one ServeRAID adapter or controller in the
system, click once on the appropriate adapter or controller to make it
active.
You can then monitor the status by clicking on the active adapter
button on the Main screen of the Administration and Monitoring
Program.
Note: You might need to use the scroll bar and scroll down to see
all of the items that appear on this screen.
Descriptions of the information that appears on the screen are as
follows:
Adapter Number The active adapter or controller (1
to 8).
Number of Logical Drives The number of defined logical
drives (0 to 8).
Unattended Mode Off - The user chooses the
recovery method when there is a
ServeRAID startup error.
Chapter 5. Starting and Using the Utility Programs
121