IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 130 / 212

Initializing the Adapter:
This operation is useful when you want to start over and create a
new configuration.
To initialize the adapter or controller:
1. Click on the icon on the Tool Bar or select Adapter
Configuration from the Advanced pull-down menu. A screen
similar to the following appears.
2. Select Initialize Adapter Configuration.
Attention:
After you initialize the configuration, you will not have access to
any data stored on the logical drives attached to the selected
ServeRAID adapter or controller.
This choice deletes the existing configuration information, sets all
functional hard disk drives attached to the controller to the Ready
state, and deletes all logical drives defined for the controller.
This choice does not change any of the ServeRAID adapter or
controller settings (such as the stripe-unit size, rebuild rate, and
so on) from their current or customized values.
3. Click on OK.
Initializing the adapter or controller configuration clears all the
logical drives and resets all the functional hard disk drives to
the Ready (RDY) state.
120
IBM ServeRAID-3H and ServeRAID-3L Adapters