IBM Netfinity ServeRAID-3H Скачать руководство пользователя страница 123

Страница: 123 / 212

To change the RAID level of an existing disk array:

Note: If you are migrating to RAID level-0, the last drive defined in

the array becomes RDY.

1. Click on the

icon on the Tool Bar or select Manage Disk

Arrays from the Advanced pull-down menu; then, select Logical
Drive Migration. A screen similar to the following appears.

2. Select Change RAID Level.

3. Click on OK.

4. Select a migrating option from the pull-down list.

Note: The affected logical drives appear, based on the

migrating option you select.

5. Click on OK to proceed.

6. Click on OK to verify the operation.

7. Select a Ready (RDY) drive to add to the array, if you are

migrating to RAID level-5.

Chapter 5. Starting and Using the Utility Programs

113

Содержание Netfinity ServeRAID-3H





















































































































































































































Результаты поиска

Содержание Netfinity ServeRAID-3H

Отзывы:

IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 123 / 212

Результаты поиска

Содержание Netfinity ServeRAID-3H

Отзывы: