IBM Netfinity ServeRAID-3H Скачать руководство пользователя страница 118

Страница: 118 / 212

2. Select the desired disk array ID from the pull-down list.

Attention:
Before proceeding, ensure that you have backed up any data
and programs that you want to save.

3. Click on OK to delete the disk array.

Note: For some operating systems, deleting a disk array and its

associated logical drives might change the drive-letter
assignments of the remaining drives when you restart the
system.

Logical Drive Administration

This section provides the information needed to create logical drives,
initialize and synchronizing logical drives, or access blocked logical
drives.

Creating Logical Drives:

To create a logical drive:

1. Click on the

icon on the Tool Bar or select Manage

Logical Drive from the Advanced pull-down menu; then, select
Create Logical Drive. A screen similar to the following appears.

Each ServeRAID adapter or controller supports a maximum of 8
logical drives. Depending upon the stripe-unit size being used,
you can combine a maximum of 8 or 16 physical drives into
each logical drive.

108

IBM ServeRAID-3H and ServeRAID-3L Adapters

Содержание Netfinity ServeRAID-3H





















































































































































































































Результаты поиска

Содержание Netfinity ServeRAID-3H

Отзывы:

IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 118 / 212

Результаты поиска

Содержание Netfinity ServeRAID-3H

Отзывы: