IBM Netfinity ServeRAID-3H Скачать руководство пользователя страница 116 | Manualshive

Страница: 116 / 212

IBM Netfinity ServeRAID-3H Скачать руководство пользователя страница 116

To create a disk array:

1. Click on the

icon on the Tool Bar or select Manage Disk

Arrays from the Advanced pull-down menu; then, select Create
Disk Array. A screen similar to the following appears.

2. Select one or more Ready (RDY) drives for the new disk array

from the Main screen of the Administration and Monitoring
Program.

To select a RDY drive, click the desired RDY button from the
device area. A disk array identifier appears beside each RDY
drive added to the disk array.

If you change your mind about a selected drive, select the button
again to remove the selected drive from the disk array.

3. Click on OK to define a logical drive for the new array. A screen

similar to the following appears.

4. Select the appropriate RAID level from the pull-down list.

Note: The number of hard disk drives in the array determines

the RAID levels available for the array.

If the array contains one hard disk drive, you can
select only RAID level-0 for the logical drive.

106

IBM ServeRAID-3H and ServeRAID-3L Adapters

«
...
114
115
116
117
118
...
»

Содержание Netfinity ServeRAID-3H





















































































































































































































Отзывы:

Нет отзывов