IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 113 / 212

Resetting the Alarm:
To reset the alarm, you can either click on the
STOP
icon or click on
Reset Alarm on the General Options screen.
Polling Options: The ServeRAID adapter or controller will poll, or
check, your server at a specified time interval for any changes that
may have occurred in the server.
You can choose how often the adapter or controller polls the server
by specifying a time interval on the options menu, from five to 60
seconds. The default time interval setting is five seconds.
The program will poll for the following events:
Ÿ
Rebuild started
Ÿ
Rebuild completed
Ÿ
Synchronization started
Ÿ
Synchronization completed
Ÿ
Migration started
Ÿ
Migration completed
Ÿ
PFA error detected
Ÿ
Dead drive detected
Ÿ
Adapter or controller is not responding to commands
Alert Options
The Netfinity Manage alerts allow system administrators who are
using the IBM Netfinity Manager Program to configure the
ServeRAID Administration and Monitoring Program to notify the
Netfinity Alert Manager of various activities occurring on the server.
To configure the settings for the Netfinity Manager alerts:
1. Open the Options pull-down menu.
2. Click on Alert Options.
STOP
Resetting the alarm turns off the alarm for the current failure
without disabling the feature.
Chapter 5. Starting and Using the Utility Programs
103