IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 111 / 212

To select and connect to a server:
1. Click on the icon on the Tool Bar or select Network
Settings from the Options pull-down menu. A screen similar to
the following appears.
2. Click on the Client/Server radio button.
3. If security is enabled on the server to which you are connecting,
type in your User Name and Password as defined by the
security file on the server to which you are connecting. (Refer to
“Background-Server Component Security” on page 91 for
information on the security file).
4. Type in either the Host Name or the TCP/IP Address of the
system, or select it from the pull-down list.
Note: If your server was started on any port other than the
default (1087), after the Host Name or TCP/IP Address
that you just entered, type in a colon and the correct port
number for your configuration (for example:
ServeRAID:1088).
5. Click on Connect to initiate a connection with the remote
system.
Chapter 5. Starting and Using the Utility Programs
101