IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 106 / 212

4. Press Enter; then, change the access permissions by typing the
following:
chmod 7ðð /usr/bin/ipssend
5. Press Enter; then, type:
chmod 7ðð /usr/bin/ipsmon
6. Press Enter; then, refer to Chapter 5, “Starting and Using the
Utility Programs” on page 97 for information to start and use the
IPSSEND and IPSMON programs.
Installing IPSSEND for DOS
To install IPSSEND for DOS:
1. Create a startable diskette. To do this, insert a blank diskette in
diskette drive A; then, type:
format a: /s
2. Press Enter.
3. Copy the IPSSEND.EXE file from the DOS directory on the IBM
ServeRAID Command Line Programs Diskette to the startable
diskette.
4. Install the ASPI device driver on the startable diskette. To do
this, insert the IBM ServeRAID Device Driver Diskette in diskette
drive A; then, type:
a:\dos\uinstall
5. Press Enter. Specify
a:\
as the Source Drive and
a:\
as the
Target Path; then, follow the instructions that appear on the
screen.
6. Leaving the startable diskette in the diskette drive, restart the
system; then, refer to Chapter 5, “Starting and Using the Utility
Programs” on page 97 for information to start and use the
IPSSEND program.
96
IBM ServeRAID-3H and ServeRAID-3L Adapters