IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 102 / 212

commands from the client. If no security file is present in the default
directory, or the directory specified by the -s parameter, security is
disabled. The server component then accepts commands from any
client connection.
The security file contains one user name and password combination
per line. The strings are separated by a colon (:) and each string
has a maximum of eight characters.
Background-Server Component Name Resolution
The server component relies on name resolution to determine the
host name from the client that is trying to connect. When a client is
trying to access a remote server, the server tries to look up the name
of the client connecting. The method used to look up the name is
determined by the configuration of the server. Some possible
methods for this are Domain Name Servers (DNS) or HOSTS files.
With certain configurations, some timing delays might occur due to
misconfiguration or inability to access the DNS. If problems persist,
check your network configuration.
IPSSEND and IPSMON Programs
IPSSEND and IPSMON are advanced command-line programs that
you can use to manage your ServeRAID adapters and controllers.
These utility programs are provided on the
IBM ServeRAID
Command Line Programs Diskette. This ServeRAID diskette is
available from the following address on the World Wide Web:
http://www.pc.ibm.com/support
See page 59 for the instructions needed to access the IBM support
page.
You can use the IPSSEND program to view the configuration of a
ServeRAID adapter or controller, rebuild a defunct drive, initialize
logical drives, synchronize logical drives, and perform other
functions.
92
IBM ServeRAID-3H and ServeRAID-3L Adapters