IBM Netfinity ServeRAID-3H, Инструкция по установке и эксплуатации, Страница: 100 / 212

Using the Command-Line Parameters
To use the command-line parameters provided in the
background-server components, issue the IPSADM command in the
following format:
IPSADM
parameter 1 parameter 2
and so on...
Valid command-line parameters for the background-server
components are as follows:
–? The –? command displays the help for the valid
parameters.
–p:number The –p:
number command specifies the port number
that the server will check for client connections.
The port number is a parameter used in TCP/IP to
distinguish among different services on a single
server. The default for the server utility programs is
port number 1087. You can use this parameter to
change the port number if another service on the
system is using 1087.
–s:filename The –s: filename command specifies the name of the
file that contains security information. For more
about security information, see “Background-Server
Component Security” on page 91.
–f The –f command specifies to log messages to the
default file, IPSADM.LOG.
–f:filename The -f: filename command lets you specify the name
of a file in which to log messages.
–d The –d command disables the logging of messages
to the standard output, which is usually the screen.
90
IBM ServeRAID-3H and ServeRAID-3L Adapters