IBM Netfinity ServeRAID-3H Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 212

IBM Netfinity ServeRAID-3H Скачать руководство пользователя страница 10

Chapter 6, “Solving ServeRAID Problems,” describes the ServeRAID
POST error codes and startup messages. This chapter also includes
some basic information about rebuilding a defunct drive.

Chapter 7, “Getting Help, Service, and Information,” provides
information about accessing the IBM Bulletin Boards, HelpCenter,
and World Wide Web sites to obtain future code and information
updates for the ServeRAID adapters and controllers.

Appendix A, “Product Warranties and Notices,” contains warranty
information, product notices, and trademarks.

Notices Used in This Book

This book contains notices to highlight information as follows:

Notes:

These notices provide important tips, guidance, or advice.

Attention:

These notices indicate possible damage to programs, devices, or
data. An attention notice is placed just

before the instruction or

situation in which damage could occur.

viii

IBM ServeRAID-3H and ServeRAID-3L Adapters

«
...
8
9
10
11
12
...
»

Содержание Netfinity ServeRAID-3H





















































































































































































































Отзывы:

Нет отзывов