IBM Netfinity FAStT500, Руководство по установке

Страница: 13 / 83

Safety statement ix
Electrical safety
To Connect:
1. Turn everything OFF.
2. First, attach all cables to devices.
3. Attach signal cables to connectors.
4. Attach power cords to outlet.
5. Turn device ON.
To Disconnect:
1. Turn everything OFF.
2. First, remove power cords from outlet.
3. Remove signal cables from connectors.
4. Remove all cables from devices.
1
DANGER
Electrical current from power, telephone, and
communication cables is hazardous.
To avoid a shock hazard:
– Do not connect or disconnect any cables or perform
installation, maintenance, or reconfiguration of this
product during an electrical storm.
– Connect all power cords to a properly wired and
grounded electrical outlet.
– Connect to properly wired outlets any equipment
that will be attached to this product.
– When possible, use one hand only to connect or
disconnect signal cables.
– Never turn on any equipment when there is evidence
of fire, water, or structural damage.
– Disconnect the attached power cords,
telecommunications systems, networks, and modems
before you open the device covers, unless instructed
otherwise in the installation and configuration
procedures.
– Connect and disconnect cables as described in the
following table when installing, moving, or opening
covers on this product or attached devices.