IBM N7800, Руководство по аппаратуре и обслуживанию

Страница: 32 / 182

– 1 ESD wrist strap
– 1 serial null modem cable
– 1 set of IBM publications
– 2 power cords
– 8 SFPs (SFPs might be installed in the N7000 series system as shipped.)
There will also be envelopes with the software EULA and license keys.
A rail kit for mounting the N7000 series system in a standard 19–inch rack may
also be present.
v
N7900 dual-controller system (2867-A21)
– 1 N7900 dual-controller system (2867-A21) containing the power supplies and
any options you ordered
– 2 console adapter cable, RJ-45 to DB-9
– 2 cable management trays
– 2 ESD wrist straps
– 1 serial null modem cable
– 1 set of IBM publications
– 4 power cords
– 16 SFPs (SFPs might be installed in the N7000 series system as shipped.)
There will also be envelopes with the software EULA and license keys.
A rail kit for mounting the N7000 series system in a standard 19–inch rack may
also be present.
Rules for installing the N7000 series system in a rack
You need to observe the following rules and restrictions when installing an N7000
series system in a standard 19-inch (48.26 cm) equipment rack with mounting rails:
svc00168
32-55 kg (70.5-121.2 lbs)
DANGER
The weight of this part or unit is between 32 and 55 kg (70.5 and 121.2 lb.). It
takes three persons to safely lift this part or unit. (C010)
Attention: Remove the power supplies and fan units from the chassis before
attempting to lift the system.
v
You must work with two other people.
DANGER
The N7000 series system unit is extremely heavy. To avoid injuring yourself
or damaging the unit, you must work with at least two other people when
you install the unit in the rack. Remove the power supplies and fan units
from the chassis before attempting to lift the unit.
v
Install the N7000 series system at the lowest point in the rack cabinet.
6
IBM System Storage: N7000 Series Hardware and Service Guide