![background image](http://html2.mh-extra.com/html/ibm/n6270/n6270_hardware-and-service-manual_3984027024.webp)
Verify that the latest level of firmware is installed on your machine before
contacting IBM for technical support.
Terminology and conventions used in this document
This guide uses the following terminology, command conventions, format
conventions and keyboard conventions.
In this document, the term
gateway
describes IBM N series storage systems that
have been ordered with gateway functionality. Gateways support various types of
storage, and they are used with third-party disk storage systems. In this case, disk
storage for customer data and the RAID controller functionality is provided by the
back-end disk storage system. A gateway might also be used with disk storage
expansion units specifically designed for the IBM N series models.
The term
filer
describes IBM N series storage systems that either contain internal
disk storage or attach to disk storage expansion units specifically designed for the
IBM N series storage systems. Filer storage systems do not support using
third-party disk storage systems.
The terms
system
or
storage system
refer to either a gateway by itself or a filer,
either by itself or with additional disk drives.
Active/active and high-availability terms
active/active configuration
In the Data ONTAP 7.2 and 7.3 release families, refers to a pair of storage
systems (sometimes called
nodes
) configured to serve data for each other if
one of the two systems stops functioning. Also sometimes referred to as
active/active pairs
.
cluster
In the Data ONTAP 7.1 release family, refers to a pair of storage systems
(sometimes called
nodes
) configured to serve data for each other if one of
the two systems stops functioning. In Data ONTAP 8.
x
, a
cluster
is a group
of connected nodes (storage systems) that share a global namespace and
that you can manage as a single virtual server or multiple virtual servers,
providing performance, reliability, and scalability benefits.
HA (high availability)
In Data ONTAP 8.
x
, the recovery capability provided by a pair of nodes
(storage systems), called an
HA pair
, that are configured to serve data for
each other if one of the two nodes stops functioning.
HA pair
In Data ONTAP 8.
x
, a pair of nodes (storage systems) configured to serve
data for each other if one of the two nodes stops functioning.
Storage terms
ACP
Alternate Control Path is a protocol that enables Data ONTAP to manage
and control the storage expansion unit storage subsystem using a separate
network from the data path, so management communication is not
dependent on the data path being intact and available.
AT-FCX
The controller module of the EXN1000 serial advanced technology
attachment (SATA) storage expansion unit.
xxiv
IBM System Storage: N6200 Series Hardware and Service Guide
Содержание N6270
