IBM Multiprise 3000 S/390, Руководство по установке

Страница: 58 / 175

Hardware Management Console Power-On
Skip this step if a Hardware Management Console is not being used
1 Setting the switches
Note: If this Hardware Management Console is an
upgraded or replacement insert the
Save/Restore diskette into drive "A" before
powering on.
1. Set the display power switch, modem
power switch and the Hardware
Management Console system unit power
switch to On.
Note: The display model/type connected
to this PC may not be identical with
the model/type used by
manufacturing during code load. If
so, during first power
up/initialization, the
"Configuration/Setup Utility" may be
invoked and flag the "Video Display
Type" as changed. This is not an
error unless it occurs every time the
PC is powered on. Save the new
settings by either "Save Settings
then Exit Setup" or "Exit Setup then
selecting the "Yes, save..." option
on the "Exit Setup" menu.
Note: If you have added this install to an
existing LAN ring you may receive
an error when the Hardware
Management Console boots up,
saying duplicate name and/or
address. Ignore the error at this
time.
4-8
Installing the System