IBM Multiprise 3000 S/390, Руководство по установке

Страница: 128 / 175

Input File On Tape
1
Special Instructions - If Errors Occur
If errors are detected during this procedure, refer to the Service Guide, SY24-6160 .
If the I/O Configuration Program returns error messages in the IOCP source file, refer to the
IOCP Users Guide GC38-0401
If you are able to correct the error, restart this procedure.
If you cannot correct the error, make arrangements to return (in order to run the checkout test),
once the customer has the input file correct and loaded. That time should be recorded as post
install activity. If the customer requires assistance creating the input file, contact your
marketing representative. Continue the installation, LOG OFF and LOG back on in SERVICE
mode then go to “Accepting Licensed Internal Code Changes (Support Element)” on page 6-57.
2 Starting the program
From the Support Element Workplace panel
1. Open Task List from the Views area
2. Open CPC Configuration from the Task
List Work Area
3. Open Groups from the Views area
4. Select CPC from the Groups Work Area
5. Drag and drop the selected object on
Input/output (I/O) Configuration in the
CPC Configuration area
Important
Refer to the corresponding pages in the
Resource Link WEB Site for the data that you
will enter on these panels.
6-50
Installing the System