IBM Multiprise 3000 S/390, Руководство по установке

Страница: 120 / 175

Establishing a CPC Console Connection
Use the following procedures to configure each
CPC being installed unless the following is true.
The customer has predefined all the new CPCs
using Hardware Configuration Definition (HCD)
release 5.1 or later and all definitions are in
one IODF.
All the new CPCs are defined to a common
Hardware Management Console with
LIC
Change enabled.
If the above is true, you may use one of the
following alternatives:
If HCD is up and running on a previously
installed CPC also defined to the common
Hardware Management Console as the new
install CPCs the system programmer can
download the new IOCDS to the new CPC
once the new CPC is IML complete.
If your installing more than one new CPC and
all are defined to a common Hardware
Management Console, then one of the new
systems can be loaded using the following
procedures. Once that is complete and the first
system has been IPLed with MVS/HCD running
the system programmer can download the
IOCDS from that system to the others.
or
You will have to repeat the procedures on the
following pages for EACH CPC in your system if
MVS is not running.
6-42
Installing the System