IBM iSeries Series, Анализ и устранение аппаратных проблем

Страница: 293 / 512

Reference code Location of failure
B428 xC09 or B1xx xxxx memory in any one of the locations given above
Instructions for Models 830 and SB2
Any of the memory expansion cards in any memory card slot, locations M02 or M05, may be the failing
item. Or, a memory card in location M02 or M05, may be the failing item. See Locations — Model 830 and
SB2 to identify the locations, type number, and remove and replace procedure for the memory expansion
cards and memory cards.
Instructions for Models 840 and SB3
A memory card in any memory card slot may be the failing item. See Locations — Model 840 and SB3 to
identify the locations, type number, and remove and replace procedure for the memory cards.
Instructions for Models 870 and 890
A memory card in one of the slot locations M01, M02, M07, M08, M17, M18, M24, or M25 may be the
cause of the problem. See Locations - Models 870 and 890 to identify the locations, type number, and
remove and replace procedure for the memory expansion cards.
Table 3. Memory locations for Models 870 and 890
Reference code Location of failure
B448 x010 memory in location M18
B448 x011 memory in location M24
B448 x012 memory in location M07
B448 x013 memory in location M02
B448 x014 memory in location M25
B448 x015 memory in location M08
B448 x016 memory in location M01
B448 x017 memory in location M17
B448 x020 memory controller in location M18-A
B448 x021 memory controller in location M24-A
B448 x022 memory controller in location M07-A
B448 x023 memory controller in location M02-A
B448 x024 memory controller in location M25-A
B448 x025 memory controller in location M08-A
B448 x026 memory controller in location M01-A
B448 x027 memory controller in location M17-A
B448 xC09 or B1xx xxxx memory in any one of the locations given above
ANYMEMX
For use by authorized service providers.
Any one of the memory expansion cards in the specified memory card slot, may be the failing item. Or the
memory card in the specified slot may be the failing item. Read the slot number (M02 or M05) in the
Location column of the reference code table.
Analyze hardware problems
281