IBM Infoprint 1410, Руководство пользователя

Страница: 193 / 254

Menus
190
Using the MFP control panel and menus
PCL Emul Settings
Tray
Renumber Note: To configure your MFP to work with print drivers or applications that use different
source assignments for the paper trays.
1 Select a print media source. Assign
Tray N N represents the number of the
tray, either Tray 1 or Tray 2.
Assign MP
Feeder Assigns the multipurpose feeder.
Assign Man
Paper Assigns paper to be manually fed
from the multipurpose feeder.
Assign Man
Env Assigns envelopes to be manually
fed from the multipurpose feeder.
2 Select a value. Off* MFP uses factory default paper
source assignments.
0...199 Select a numeric value to assign a
custom value to a paper source.
None Paper source ignores the Select
Paper Feed command.
Other Tray Renumber selections View Factory
Def Use the navigation arrow buttons
to display the factory default value
assigned to each paper source.
Restore
Defaults Select Yes to return all tray
assignments to factory default
values.
Defaults Menu – Print Settings – PCL Emul Menu – PCL Emul Settings
Menu item Purpose Values and descriptions
Point Size To change the point size for
scalable typographic fonts. 1...1008
(in increments of 0.25 points)
Point size refers to the height
of the characters in the font.
One point equals
approximately 1/72 of an inch.
You can select point sizes
from 1 to 1008 in increments
of 0.25 points.
Note: Point Size is only
displayed for typographic
fonts.
12*
Defaults Menu – Print Settings – PCL Emul Menu(continued)
Menu item Purpose Values and descriptions