IBM Flex System x440 Compute Node, Инструкция по установке и обслуживанию

Страница: 15 / 584

You can also find documentation that is related to IBM Flex System products at
http://publib.boulder.ibm.com/infocenter/flexsys/information/index.jsp.
The IBM Documentation CD
The IBM Documentation CD contains documentation for the compute node in
Portable Document Format (PDF). It includes the IBM Documentation Browser to
help you find information quickly.
You can run the IBM Documentation CD on any computer that meets the hardware
and software requirements.
Hardware and software requirements
Use this information to determine the minimum hardware and software
requirements.
The IBM Documentation CD requires the following minimum hardware and
software:
v
Microsoft Windows
v
100 MHz microprocessor
v
32 MB of RAM
v
Adobe Acrobat Reader 3.0 (or later) or xpdf, which comes with Linux operating
systems
Using the Documentation Browser
Use this information to start the Documentation Browser.
Use the Documentation Browser to browse the contents of the CD, read brief
descriptions of the documents, and view documents, using Adobe Acrobat Reader
or xpdf. The Documentation Browser automatically detects the regional settings in
use in your system and displays the documents in the language for that region (if
available). If a document is not available in the language for that region, the
English-language version is displayed.
Use one of the following procedures to start the Documentation Browser:
v
If Autostart is enabled, insert the CD into the CD or DVD drive. The
Documentation Browser starts automatically.
v
If Autostart is disabled or is not enabled for all users, use one of the following
procedures:
– If you are using a Windows operating system, insert the CD into the CD or
DVD drive and click Start
→
Run . In the Open field, type
e
:\win32.bat
where e is the drive letter of the CD or DVD drive, and click OK .
– If you are using Red Hat Linux, insert the CD into the CD or DVD drive;
then, run the following command from the /mnt/cdrom directory:
sh runlinux.sh
Select the compute node from the
Product
menu. The
Available Topics
list
displays all the documents for the compute node. Some documents might be in
folders. A plus sign (+) indicates each folder or document that has additional
documents under it. Click the plus sign to display the additional documents.
Chapter 1. Introduction
3