manualshive.com logo in svg

IBM Flex System p270 Compute Node, Инструкция по установке и обслуживанию

Компьютерный узел IBM Flex System p270 - высокопроизводительное решение для центра обработки данных. Установочное и сервисное руководство доступно для загрузки бесплатно на нашем веб-сайте. Это руководство поможет вам быстро и легко настроить и обслуживать ваше устройство. Скачайте его сейчас с {веб-сайта}.

Поделиться
Скачать
background image

Chapter 4. Installing the operating system

Before you install the operating system on the compute node, verify that the compute node is installed in
the IBM Flex System Enterprise Chassis, that the management-module firmware is at the latest available
level, and that the compute node is turned on.

About this task

If you are not using an unattended network-installation method to install your operating system, you
must first provide a serial over LAN (SOL) connection to the compute node to install your operating
system. For information about starting an SOL session, see http://publib.boulder.ibm.com/infocenter/
flexsys/information/topic/com.ibm.acc.cmm.doc/dw1kt_cmm_cli_book.pdf.

Important:

v

After you install the operating system on the compute node, you must install any service packs or the
update packages that come with the operating system. For additional information, see the instructions
that come with your operating-system documentation and the service packs or the update packages.

v

If you plan to install an Ethernet I/O expansion card, first install the operating system so that the
onboard ports can be recognized and configured before the ports on the I/O expansion card. If you
install the Ethernet I/O expansion card before you install the operating system, the I/O expansion card
ports will be assigned before the onboard ports.

See the ServerProven website for information about supported operating-system versions and all compute
node optional devices.

Locating the installation instructions

You can order the IBM Flex System p270 Compute Node with Virtual I/O Server (VIOS), AIX
operating-system, or IBM i operating-system already installed. If you did not order your compute node
with these operating systems installed, you can install them as a local operating system. After installing
VIOS, you can install the AIX, Linux, or IBM i operating system as a client operating system in a logical
partition (LPAR).

About this task

After you configure the compute node hardware, go to the operating-system documentation for the latest
operating-system installation instructions. See the following operating system descriptions for more
information:

v

Installing Virtual I/O Server

See the Installing section of the PowerVM Information Roadmap.
If you did not order your servers with the VIOS software installed, you can use the Virtual I/O Server
DVD in the product package to install VIOS and set up a virtual environment that supports client
operating systems in logical partitions. You can then install any of the supported operating systems as
a client in an LPAR.
The order of installation of VIOS and the operating systems is important. You can update the firmware
first with the stand-alone Diagnostics CD, but you must install the VIOS software before you install any
other software. The VIOS software creates the Integrated Virtual Manager administrator console and the
first logical partition, which VIOS and Integrated Virtual Manager (IVM) occupy.
After you install VIOS, you can use the IVM and Micro-Partitioning

®

features to create client partitions

for client operating systems.

v

Installing AIX

© Copyright IBM Corp. 2013, 2015

23

Содержание Flex System p270 Compute Node































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Flex System p270 Compute Node

Gateway 7250R Rack Mounting Instructions preview
7250R
Бренд: Gateway Страницы: 26
IBM eServer BladeCenter HS20Type 8832 Maintenance And Troubleshooting Manual preview
eServer BladeCenter HS20Type 8832
Бренд: IBM Страницы: 158
NEC NEAX2000 IVS Series System Manual preview
NEAX2000 IVS Series
Бренд: NEC Страницы: 160
IBM eServer 380 xSeries User Reference Manual preview
eServer 380 xSeries
Бренд: IBM Страницы: 112
Moxa Technologies NPort P5250A Series Quick Installation Manual preview
NPort P5250A Series
Бренд: Moxa Technologies Страницы: 2
Supero SuperServer 1026T-M3 User Manual preview
SuperServer 1026T-M3
Бренд: Supero Страницы: 104
HPE ProLiant DL580 Gen10 User Manual preview
ProLiant DL580 Gen10
Бренд: HPE Страницы: 158
Supero SUPERSERVER 6015C-M3 User Manual preview
SUPERSERVER 6015C-M3
Бренд: Supero Страницы: 118
AIC SB302-LB User Manual preview
SB302-LB
Бренд: AIC Страницы: 101
PRIMERGY BX600 S2 Hardware Manual preview
BX600 S2
Бренд: PRIMERGY Страницы: 87
Rackable Systems OmniStor 4900F Series User Manual preview
OmniStor 4900F Series
Бренд: Rackable Systems Страницы: 196
Avaya S3210 Manual preview
S3210
Бренд: Avaya Страницы: 84
QNAP TS 73A Series User Manual preview
TS 73A Series
Бренд: QNAP Страницы: 68
Supero SuperServer 6024H-82 User Manual preview
SuperServer 6024H-82
Бренд: Supero Страницы: 122
Sun Microsystems Sun Fire Netra 1280 Product Notes preview
Sun Fire Netra 1280
Бренд: Sun Microsystems Страницы: 10
3onedata NP301 Quick Installation Manual preview
NP301
Бренд: 3onedata Страницы: 3
HP 376227-B21 - ProLiant InfiniBand 4x Fabric Copper Switch User Manual preview
376227-B21 - ProLiant InfiniBand 4x Fabric Copper Switch
Бренд: HP Страницы: 169
Fujitsu PRIMERGY CX400 M6 Upgrade And Maintenance Manual preview
PRIMERGY CX400 M6
Бренд: Fujitsu Страницы: 209

Бренды по названию

Популярные бренды

Загрузить еще бренды