IBM FAStT200 HA, Инструкция по установке и эксплуатации

Страница: 49 / 114

Chapter 4. Operating the storage server
31
Figure 7. RAID controller LEDs
Fault
Host loop
10BT 100BT Battery Expansion loop
Expansion port bypass
Cache active
Controller
Fault
10BT 100BT FC-Host
FC-Expansion
Table 4. RAID Controller LEDs
Icon LED Color Operating states
1
Fault Amber • Off - Normal operation.
• On - The RAID controller has failed.
Host loop Green • On - Normal operation
• Off - One of the following situations has occurred:
— The host loop is down, not turned on, or not
connected.
— A GBIC has failed, or the host port is not occupied.
— The RAID controller circuitry has failed, or the RAID
controller has no power.
Cache active Green • On - There is data in the RAID controller cache.
• Off - One of the following situations has occurred:
— There is no data in cache.
— There are no cache options selected for this array.
— The cache memory has failed, or the battery has
failed.
Battery Green • On - Normal operation.
• Flashing - The battery is recharging or performing a self-
test.
• Off - The battery or battery charger has failed.
Expansion port
bypass Amber • Off - Normal operation.
• On -One of the following situations has occurred:
— The expansion port is not occupied.
— The Fibre Channel cable is not attached to an
expansion unit.
— The attached expansion unit is not turned on.
— A GBIC has failed, a Fibre Channel cable has failed,
or a GBIC has failed on the attached expansion unit.
+