IBM eserver pSeries 690, Руководство по установке

Страница: 7 / 142

Appendix E. Attaching Multiple pSeries 690s to One Hardware Management
Console . . . . . . . . . . . . . . . . . . . . . . . . . 59
Installing the 8-Port async Adapter . . . . . . . . . . . . . . . . . 59
Connect the Serial Cables from the pSeries 690 to the 8-Port async Adapters 60
Installing the 128-Port async Adapter . . . . . . . . . . . . . . . . 61
128-Port async Adapter Line Connectors . . . . . . . . . . . . . . 61
Setting a RAN Node Number . . . . . . . . . . . . . . . . . . 62
Configuring the 128-Port async Adapter . . . . . . . . . . . . . . 62
Updating the Device Driver . . . . . . . . . . . . . . . . . . . 64
Connect the Serial Cables from the pSeries 690 to the 128-Port async Adapters 64
Verify that Installation is Complete by Using the HMC Interface . . . . . . . . 65
Appendix F. System Records . . . . . . . . . . . . . . . . . . 67
Record the Identification Numbers . . . . . . . . . . . . . . . . . 67
Record System - Processor, Memory, and I/O Configuration . . . . . . . . . 69
Verify that All Hardware is Present . . . . . . . . . . . . . . . . . 73
Appendix G. Subsystem Positioning and Cabling . . . . . . . . . . . 75
Operator Panel Cable and Diskette Drive Cable to the Media Subsystem (Rear
View) . . . . . . . . . . . . . . . . . . . . . . . . . . 75
I/O Subsystem Positions, Fully Populated Primary and Secondary Rack (Rear View
Without IBF) . . . . . . . . . . . . . . . . . . . . . . . . 76
I/O Subsystem Positions, Fully Populated Primary and Secondary Rack (Rear View
with IBFs). . . . . . . . . . . . . . . . . . . . . . . . . 77
Placement of Subsystem 4 in a Two-Rack Configuration (Rear View with IBF) . . . 78
I/O Subsystems (1 Through 4 Without IBFs) RIO Cabling to I/O Books . . . . . 79
I/O Subsystems (5 and 6) RIO Cabling to the Secondary I/O Book . . . . . . 80
I/O Subsystems (7 and 8) RIO Cabling to the Third I/O Book . . . . . . . . 81
I/O Subsystems (1 through 3 with IBFs) RIO Cabling to I/O Books. . . . . . . 82
RIO Cable to I/O Subsystem (4 through 6) with IBFs Installed . . . . . . . . 83
I/O Subsystems (7 and 8) RIO Cabling to the Third I/O Book . . . . . . . . 84
Power and SCSI Cables to the Media Subsystem . . . . . . . . . . . . 85
Hardware Management Console for pSeries (HMC) to the Primary I/O Book . . . 86
Appendix H. Cabling Information . . . . . . . . . . . . . . . . . 87
Power Cabling . . . . . . . . . . . . . . . . . . . . . . . . 87
RIO Cables and I/O Power Cables . . . . . . . . . . . . . . . . . 89
Appendix I. Service Processor Setup and Test . . . . . . . . . . . . 93
Service Processor Setup Checklist . . . . . . . . . . . . . . . . . 93
Testing the Setup . . . . . . . . . . . . . . . . . . . . . . . 94
Testing Call-In . . . . . . . . . . . . . . . . . . . . . . . 94
Testing Call-Out . . . . . . . . . . . . . . . . . . . . . . 95
Serial Port Configuration . . . . . . . . . . . . . . . . . . . 95
Appendix J. Removing and Installing the Rack Top Frame . . . . . . . . 97
Options for Performing this Procedure . . . . . . . . . . . . . . . . 97
Required Tools . . . . . . . . . . . . . . . . . . . . . . . . 98
Removing the Covers . . . . . . . . . . . . . . . . . . . . . 99
Side Cover Removal . . . . . . . . . . . . . . . . . . . . 100
Contents
v