IBM Eserver pSeries 670, Руководство пользователя

Страница: 111 / 198

This option allows the user to turn on or off including the Advanced Diagnostics (the
default is off).
v
Include Error Log Analysis
This option allows the user to turn on or off including the Error Log Analysis (ELA)
(the default is off).
v
Number of Days Used to Search Error Log
This option allows the user to select the number of days for which to search the AIX
error log for errors when running the Error Log Analysis. The default is seven days,
but it can be changed from one to sixty days.
v
Display Progress Indicators
This option allows the user to turn on or off the progress indicators when running the
Diagnostic Applications. The progress indicators display the test that is running in a
popup box at the bottom of the screen (the default is on).
v
Diagnostic Event Logging
This option allows the user to turn on or off logging information to the Diagnostic
Event Log (the default is on).
v
Diagnostic Event Log File Size
This option allows the user to select the maximum size of the Diagnostic Event Log.
The default size for the Diagnostic Event Log is 100 KB. The size can be increased
in 100 KB increments to a maximum of 1 MB.
Display Previous Diagnostic Results
Note: This service aid is not available when you load the diagnostics from a source
other than a hard disk drive or a network.
This service aid allows a service representative to display results from a previous
diagnostic session. When the Display Previous Diagnostic Results option is selected,
the user can view up to 25 no trouble found (NTF) and service request number (SRN)
results.
This service aid displays Diagnostic Event Log information. You can display the
Diagnostic Event Log in a short version or a long version. The Diagnostic Event Log
contains information about events logged by a diagnostic session.
This service aid displays the information in reverse chronological order. If more
information is available than can be displayed on one screen, use the Page Down and
Page Up keys to scroll through the information.
This information is not from the AIX operating system error log. Display previous
diagnostic results information is stored in the /var/adm/ras directory.
You can run the command from the AIX command line by typing:
/usr/lpp/diagnostics/bin/diagrpt [[-o] | [-s mmddyy] | [-a] | [-r]]
Flag Description
Chapter 6. Introducing Tasks and Service Aids
95