IBM eserver 7210, Руководство по настройке и эксплуатации

Страница: 23 / 38

v
If there is more than one device (
2
in Figure 5) attached to the host system
1
,
move the terminator
3
to the last device.
Notes:
1.
A SCSI device can have one (single) or two (dual) connectors on the back of the
device. Figure 6 on page 10 shows a single-connector device
1
connecting to a
dual-connector device
2
. Figure 7 on page 10 shows a dual-connector device
2
connecting to a single-connector device
1
.
2. The AS/400 host system only supports the attachment of specific external
storage devices, including the 7210 DVD-RAM Drive. Contact your IBM
authorized support personnel for information about valid attached devices and
the configurations allowed by the system.
3. When attaching multiple SCSI devices to a host system, ensure that the wide
SCSI device, such as a 7207 Tape Drive, is connected first. Any narrow SCSI
devices, such as the 7210 DVD-RAM Drive, should be connected after the wide
devices to ensure that the wide device is fully enabled.
Figure 4. Example of Attaching One SCSI Device to the System Unit. The view is from the
side.
Figure 5. Example of Attaching Multiple SCSI Devices to the System Unit
Chapter 2. Setting Up
9