IBM eserver 630 6C4, Руководство по обслуживанию

Страница: 513 / 573

Read the Rack Safety Instructions
Review the following instructions for mounting the system drawer into the rack.
Rack Safety Instructions
v
Do not install this unit in a rack where the ambient temperatures will exceed 35
degrees C.
v
Do not install this unit in a rack where the airflow is compromised. Any side, front or
back of the unit used for air flow through the unit must not be in indirect contact with
the rack.
v
Ensure that a hazardous condition is not created due to uneven mechanical loading
when installing this unit in a rack. If the rack has a stabilizer it must be firmly
attached before installing or removed this unit.
v
Consider the connection of the equipment to the supply circuit so that the overloaded
circuits do not compromise the supply wiring or over-current protection.
v
An electrical outlet that is not correctly wired could place hazardous voltage on the
metal parts of the system or the devices that attach to the system. It is the
responsibility of the customer to ensure that the outlet is correctly wired and
grounded to prevent an electrical shock.
When installing the Model 6C4, you will need the following items:
v
Rack-Mounting Template
v
2 Slide Rail Assemblies
v
Cable Management Arm
v
Rack-Mounting Kit Envelope
v
Screwdriver or similar tool if available
Appendix D. Setting Up the System
493