IBM eserver 630 6C4, Руководство по обслуживанию

Страница: 22 / 573

System Features
Bus Architecture
Four PCI-X slots are available. The slots numbered 1 through 4 and are 64-bit capable
at 133 MHz, 3.3 volts. Use slots 3 and 4 with PCI adapters that demand high
performance. Use slots 1 and 2 with PCI adapters that do not demand high
performance. All PCI-X slots are capable of running either 64-bit or 32-bit adapters.
However, a 32-bit adapter operates in a 32-bit mode and shows no performance
advantage while running in a 64-bit slot. The following illustration indicates the PCI-X
slot numbered locations when viewing from the rear of the system.
Processors
v
One and two-way cards with POWER4 1.0 GHz microprocessors.
Notes:
1. If you are using a 1-way processor, then only one processor card should be used
in your system. If you are using a 2-way processor, your system will support up
to 2 processor cards.
2. Using two 1-way processors or a combination of a 1-way and a 2-way processor
in your system are nonsupported configurations.
v
An upgrade from a 1-way (FC 5131) to a 2-way (FC 5132) is available by feature
conversion.
v
32 MB L3 cache per-processor card
2 Eserver
pSeries 630 Models 6C4 and 6E4 Service Guide