IBM eServer 445 xSeries, Руководство по установке

Страница: 43 / 124

Installing the serial port
Included with your server is a serial port that you can install at any time. This
section provides the instructions for installing the serial port.
Notes:
1. Installation of the serial port is optional. You do not have to install the serial port
for your server to operate properly. Also, the cabling information provided in this
publication covers some of the possible configurations.
2. The serial port will occupy PCI-X slot one.
Complete the following steps to install the serial port:
1. Read the safety information beginning on page v and “Installation guidelines”
on page 7.
2. Open the top cover.
3. Open the blue adapter guide by lifting the front edge, as shown in the
illustration.
4. Remove the PCI-X slot cover and the PCI-X divider from slot one.
NO
TE
:
FO
R P
RO
PE
R A
IRF
LO
W,
RE
PL
AC
E F
AN
W
ITH
IN 2
M
INU
TE
S
FR
ON
T O
F B
OX
NO
TE
:
FO
R P
RO
PE
R A
IRF
LO
W,
RE
PL
AC
E F
AN
W
ITH
IN 2
M
INU
TE
S
FR
ON
T O
F B
OX
Tab
Adapter
retention
latch
Attention
LED
Power
LED
Adapter guide
PCI-X
divider
Figure 27. PCI-X slot components
Chapter 2. Installing options
31