IBM Elastic Storage System 5000 Series Скачать руководство пользователя страница 18

Страница: 18 / 102

The following notices and statements are used in IBM documents. They are listed in order of decreasing

severity of potential hazards.
Danger notice definition

A special note that emphasizes a situation that is potentially lethal or extremely hazardous to people.

Caution notice definition

A special note that emphasizes a situation that is potentially hazardous to people because of some

existing condition, or to a potentially dangerous situation that might develop because of some unsafe

practice.

Note: In addition to these notices, labels might be attached to the product to warn of potential hazards.

Finding translated notices
Each safety notice contains an identification number. You can use this identification number to check the

safety notice in each language.
To find the translated text for a caution or danger notice:

1. In the product documentation, look for the identification number at the end of each caution notice or

each danger notice. In the following examples, the numbers (D002) and (C001) are the identification

numbers.

DANGER: A danger notice indicates the presence of a hazard that has the potential of causing

death or serious personal injury. (D002)

CAUTION: A caution notice indicates the presence of a hazard that has the potential of causing

moderate or minor personal injury. (C001)

2. After you download the IBM System Safety Notices document, open it.
3. Under the language, find the matching identification number. Review the topics about the safety

notices to ensure that you are in compliance.

Danger and caution notices

Before you install, service, or move a Model 092 expansion enclosure, always read and follow the safety

notices and guidelines.
Use the reference numbers in parentheses at the end of each notice (for example, D005) to find the

matching translated notice in IBM Systems Safety Notices.

DANGER: Multiple power cords. The product might be equipped with multiple power cords. To

remove all hazardous voltages, disconnect all power cords. (L003)

DANGER:

4 IBM Elastic Storage System 5000: Model 092 Hardware Guide

Содержание Elastic Storage System 5000 Series







































































































Результаты поиска

Содержание Elastic Storage System 5000 Series

Отзывы:

Бренды по названию

Популярные бренды

IBM Elastic Storage System 5000 Series, Руководство по оборудованию

Результаты поиска

Содержание Elastic Storage System 5000 Series

Отзывы:

Бренды по названию

Популярные бренды