IBM E Server x336 Series, Руководство по установке опций, Страница: 41 / 76

7. Go to “Installing an internal DVD-ROM drive or DVD-ROM blank bezel” on page
29.
Installing an internal DVD-ROM drive or DVD-ROM blank bezel
Complete the following steps to install an internal DVD-ROM drive or DVD-ROM
blank bezel.
DVD-ROM drive
DVD-ROM blank
bezel
1. Read the safety information beginning on page v and “Installation guidelines” on
page 13.
2. Turn off the server and peripheral devices and disconnect all power cords and
external cables (see “Turning off the server” on page 15); then, remove the
cover (see “Removing the server cover” on page 17).
3. Remove the DVD-ROM drive or DVD-ROM blank bezel. Be sure to follow the
instructions in “Removing an internal DVD-ROM drive or DVD-ROM blank bezel”
on page 27.
DVD-ROM drive
DVD-ROM drive
retention clip
Release latch
Chapter 2. Installing options
29