IBM DS8700, Введение и руководство по планированию

Страница: 140 / 256

Note: The Earthquake Resistance Kit option is available for models 941 and 94E as
an RPQ.
It is important for computer systems to be adequately restrained during
earthquakes. This precaution helps to prevent human injury. It also ensures the
availability of the system following an earthquake by limiting potential damage to
critical system components such as hard drives. This optional Earthquake
Resistance Kit feature includes cross-braces on the front and rear of the rack, which
prevent the rack from twisting. Hardware at the bottom of the rack secures it to
the floor. The Earthquake Resistance Kit ensures that your storage unit complies
with the earthquake resistance objectives that are documented in Earthquake
Resistance for IBM Hardware Products (IBM Corporate Bulletin C-B 1-9711-009
9202).
You are responsible for obtaining specific fastening hardware and preparing the
floor before the IBM service representative can install the Earthquake Resistance
Kit. Installation of the required floor hardware and the Earthquake Resistance Kit
is disruptive. If the Earthquake Resistance Kit feature is installed on an existing
storage unit, the storage unit must be turned off and temporarily moved while the
floor preparations are made and the kit is installed.
Notes:
v If you order the optional Earthquake Resistance Kit, you must order one
for each storage unit rack.
v If you want IBM to remove a previously installed Earthquake Resistance
Kit, it must be removed by an IBM Service Representative.
Feature code Earthquake Resistance Kit
Use this feature code when you order the Earthquake Resistance Kit option for
models 951 and 95E.
1906 Earthquake Resistance Kit (all models)
BSMI certificate (Taiwan)
The BSMI certificate for Taiwan option provides the required Bureau of Standards,
Metrology and Inspection (BSMI) ISO 9001 certification documents for DS8000
shipments to Taiwan.
If the DS8000 models that you order are shipped to Taiwan, you must order this
option for each model that is shipped.
Feature code for BSMI certificate (Taiwan)
Use this feature code when you order the BSMI certificate options for a DS8000
model.
0400 This feature provides the BSMI certification documents that are required
when the DS8000 model is shipped to Taiwan.
Shipping weight reduction
The shipping weight reduction option allows you to receive delivery of a DS8000
model in multiple shipments.
If your site has delivery weight constraints, IBM offers a shipping weight reduction
option that ensures the maximum shipping weight of the initial model shipment
does not exceed 909 kg (2000 lb). The model weight is reduced by removing
selected components, which are shipped separately.
118
Introduction and Planning Guide