background image

Handling precautions

Ÿ

Wear a wrist strap while handling the drive to pre-
vent damage from  Electrostatic Discharge (ESD).

Ÿ

Set the drive down gently to prevent damage from
impact or vibration.  

Ÿ

Do not open the ESD bag containing the drive until
needed.

Ÿ

Handle the drive carefully by the edges.  Do not
touch the exposed printed circuit board or any
electronic components.

Ÿ

Do not press on the top or bottom of the drive.

Ÿ

Do not cover the drive’s breather hole.

Quick installation

IMPORTANT: Back up all data before proceeding with
installation!

Set the jumpers

Ÿ

Master drive.  No jumpers are required if the drive
is the only drive in a system or the Master drive in a
two-drive system. 

Ÿ

Slave drive.  If the drive is the Slave drive in a two-
drive system, jumper setting A2 (see opposite) is
required.

Ÿ

Cable Select.  Consult the system manual to see if
your computer supports Cable Select before choos-
ing the A3 jumper setting

.

A

ttach the drive

Consult your system manual for instructions on how to  
complete the physical installation of the drive.

Jumper settings

A1.

A2.

A3.

A4.

A5.

Pin 1

djsa_qi1.prz

A1. Master
A2. Slave
A3. Cable Select
A4. Never Attach a Jumper Here
A5. Never Attach a Jumper Here

Configure your computer
1. Turn on your computer.  Your computer may detect a

configuration change and prompt you to proceed to
the Setup screen.

2. If your computer does not prompt you to reconfigure,

enter your computer’s Setup, typically by key
selection or keyboard combinations during power-on
or during a reboot. Refer to your system manual for
the proper key sequence. If the computer fails to boot
up, power off, remove the drive, and return your
system to its original configuration.  Reboot and enter
your computer’s Setup. Follow the directions in
step 3, then attach the drive.

3. Select Auto Detect if your computer Setup supports

this feature.  If your computer does not support Auto
Detect
, select the appropriate UDT (User Definable
Type) for the drive.

ibm

Quick installation guide

Travelstar 25GS, 18GT, 
& 12GN

ATA/IDE

DARA-206000

DARA-209000

DARA-212000

DARA-215000

DARA-218000

DARA-225000

Model:

IBM storage products

Page 1

IBM Technology Group Support Center

version 2.0

Отзывы: