IBM Brocade, Инструкция по установке и эксплуатации

Страница: 19 / 74

Introduction 7
Notices and statements in this document
1
Use one of the following procedures to start the Documentation Browser:
•
If Autostart is enabled, insert the CD into the CD or DVD drive. The Documentation Browser
starts automatically.
•
If Autostart is disabled or is not enabled for all users, use one of the following procedures:
-
If you are using a Windows operating system, insert the CD into the CD drive and click
Start --> Run. In the Open field, type
e:\win32.bat
where e is the drive letter of the CD or DVD drive, and click OK.
-
If you are using Red Hat Linux, insert the CD into the CD or DVD drive; then, run the
following command from the /mnt/cdrom directory:
sh runlinux.sh
Select your BladeCenter product from the Product menu. The Available Topics list displays all the
documents for your BladeCenter product. Some documents might be in folders. A plus sign (+)
indicates each folder or document that has additional documents under it. Click the plus sign to
display the additional documents.
When you select a document, a description of the document is displayed under Topic Description.
To select more than one document, press and hold the Ctrl key while you select the documents.
Click View Book to view the selected document or documents in Acrobat Reader or xpdf. If you
selected more than one document, all the selected documents are opened in Acrobat Reader or
xpdf.
To search all the documents, type a word or word string in the Search field and click Search. The
documents in which the word or word string appears are listed in order of the most occurrences.
Click a document to view it, and press Crtl+F to use the Acrobat search function, or press Alt+F to
use the xpdf search function within the document.
Click Help for detailed information about using the Documentation Browser.
Notices and statements in this document
The caution and danger statements in this document are also in the multilingual Safety
Information document, which is on the IBM Documentation CD . Each statement is numbered for
reference to the corresponding statement in your language in the Safety Information document.
The following notices and statements are used in this document:
•
Note: These notices provide important tips, guidance, or advice.
•
Important: These notices provide information or advice that might help you avoid inconvenient
or problem situations.
•
Attention: These notices indicate possible damage to programs, devices, or data. An attention
notice is placed just before the instruction or situation in which damage might occur.
•
Caution: These statements indicate situations that can be potentially hazardous to you. A
caution statement is placed just before the description of a potentially hazardous procedure
step or situation.
•
Danger: These statements indicate situations that can be potentially lethal or extremely
hazardous to you. A danger statement is placed just before the description of a potentially
lethal or extremely hazardous procedure step or situation.