IBM BNT RackSwitch G8124, Руководство по установке

Страница: 40 / 88

Installing the RackSwitch in an IBM System x or Power rack
This section describes how to install the RackSwitch in an IBM System Networking
adjustable 19” 4-post rail rack (for Power and System x racks). For information
about mounting the RackSwitch in other rack types, see the following sections:
v
“Installing the RackSwitch in a standard equipment rack” on page 18
v
“Installing the RackSwitch in an IBM iDataPlex rack” on page 21
The IBM System Networking adjustable 19” 4-post rail mount kit parts must be
purchased separately.
The following table lists the parts included in the IBM System Networking adjustable
19” 4-post rail kit.
Table 16. IBM System Networking adjustable 19” 4-post rail mount kit parts
Item number Description Quantity
1 Label 1
2 M6 locking washers 8
3 M3 screws 4
4 M6 screws 8
5 M6 clip nuts 8
6 M6 cage nuts 8
7 M4 screws 16
8 Filler plate 1
9 Switch front bracket 2
10 Rear mounting bracket 1
11 Rear mounting bracket with
cord exit 1
24
IBM System Networking RackSwitch G8124 and G8124-E: Installation Guide