IBM BNT RackSwitch G8124, Руководство по установке

Страница: 31 / 88

Product name IBM System Networking RackSwitch G8124
Model number _____________________________________________
Serial number _____________________________________________
Part number _____________________________________________
Media access control
(MAC) address for switch _____________________________________________
MAC addresses for other
components _____________________________________________
_____________________________________________
_____________________________________________
Required tools
You need the following tools or equipment to install the RackSwitch G8124:
v
Standard flat-blade screwdriver
v
#2 Phillips screwdriver
v Electrostatic discharge wrist strap
Package contents
The basic package contains the following items:
v G8124 switch unit
v
Standard rack mount kit
– Two brackets
– Screws to attach brackets to the switch unit
– Screws to attach the switch unit to the equipment rack
v
Mini-USB serial cable
v
Two AC or DC power cords
v One IBM Documentation CD which includes the Installation Guide (this
document)
v
One Environmental Notices CD
v One Warranty Information document
v
One Important Notices document
Environmental requirements
This section describes the basic environmental requirements for the RackSwitch.
Make sure that the location where you install the switch meets the following
requirements:
v Install the switch unit in a dry, clean, well-ventilated area.
v
Provide adequate space in the front and back of the switch unit, to ensure proper
air flow.
v Make sure that an adequate grounded power supply is within reach of the switch
unit.
v
Make sure that twisted-pair cable is routed away from power lines, fluorescent
lighting fixtures and other sources of electrical interference.
Chapter 2. Installing the RackSwitch and options
15