IBM BladeCenter T, Руководство по техническому обслуживанию и ремонту, Страница: 58 / 140

To reduce the possibility of electrostatic discharge, observe the following
precautions:
v
Limit your movement. Movement can cause static electricity to build up around
you.
v
Handle the device carefully, holding it by its edges or its frame.
v
Do not touch solder joints, pins, or exposed printed circuitry.
v Do not leave the device where others can handle and damage it.
v
While the device is still in its static-protective package, touch it to an unpainted
metal part of the system unit for at least 2 seconds. This drains static electricity
from the package and from your body.
v
Remove the device from its package and install it directly into the system unit
without setting the device down. If it is necessary to set down the device, place
it back into its static-protective package. Do not place the device on the system
unit or on a metal surface.
v
Take additional care when handling devices during cold weather. Heating
reduces indoor humidity and increases static electricity.
This chapter provides instructions for installing and removing modules, options,
and blade servers in the BladeCenter T unit.
Each module is keyed so that it can be inserted only in an appropriate bay. For
example, you can insert an I/O module only in an I/O-module bay.
This section describes the following BladeCenter T modules and how to install and
remove them:
v
Bezel assembly
v
Bezel air filter
v
Power module
v
Media tray
v Management module
v
Blower module
v KVM module
v
LAN module
v
I/O modules
v
Blade server
See the “Rear view” on page 12 and “Front view” on page 7 for the location of
each module. These modules supply common functions to the blade servers that
are installed in the blade bays at the front of the BladeCenter T unit.
The KVM module and media tray supply I/O (CD-ROM drive, USB ports,
keyboard, video, and mouse) that is available to all the blade servers that support
those I/O functions, selected by any one blade server at a time.
38
BladeCenter T Type 8267: Hardware Maintenance Manual and Troubleshooting Guide