IBM BladeCenter T, Руководство по техническому обслуживанию и ремонту, Страница: 55 / 140

Chapter 4. Setting up the BladeCenter T hardware
This chapter provides instructions for setting up the BladeCenter T unit and
installing and removing modules, options, and blade servers.
Setting up the BladeCenter T unit
Statement 32
CAUTION:
To avoid personal injury, before lifting the unit, remove all the blades, power
supplies, and removable modules to reduce the weight.
(8X)
(4X)
(4X)
86 kg
(190 lbs)
39 kg
(85 lbs)
CAUTION:
Use safe practices when lifting.
Install the BladeCenter T unit in a rack before installing any blade servers in the
BladeCenter T unit. If your BladeCenter unit has blade servers already installed,
remove them first. Detailed instructions for installing and cabling a BladeCenter T
unit in a rack are in the
Rack Installation Instructions that come with the
BladeCenter T unit.
Installation guidelines
This section includes guidelines for:
v
Preparing and making power connections before installing the BladeCenter T
modules, options, and blade servers.
v
System reliability considerations.
v
Handling static-sensitive devices and the use of the electro-static discharge (ESD)
connector.
Before you begin to install options in the BladeCenter T unit, read the following
information:
v
Read the safety information in “Safety” on page v and the guidelines in
“Handling static-sensitive devices” on page 37. This information will help you
work safely with your BladeCenter T unit and options.
v
Blue on a component indicates touch points, where you can grip the component
to remove it from or install it in the server, open or close a latch, and so on.
© Copyright IBM Corp. 2011,
35