IBM BladeCenter S SAS RAID Controller Module, Инструкция по установке и эксплуатации

Страница: 87 / 216

swversion
The
swversion
command retrieves and displays the software version.
Command arguments:
<CLI> swversion
Example:
<CLI> swversion
Current Machine Local Time: 11/27/2009
11:27:09 PM
Software version : H-2.0.2.6
UBoot version : H-1.1.4.5
OS version : H-2.4.20.11
SES version : 0105
BMC version : S0BT07c 011A 06/30/2009
FPGA version : 01.06
CPLD version : S0CP00A C00A 01/01/2000
SAS switch version : S0SW01D R105 6/8/2009
BBU FirmwareRev : 53.0
Package Build No : 1.2.0.041
time
The
time
command sets and returns the date and time. It is issued by the system
administrator for timestamps in the system, such as logs, alerts, volume creation
time, and flashcopy name suffixes. The Linux operating system time is set in the
factory and cannot be changed. This factory set Linux time is used for various
purposes, such as scheduling tasks and monitoring. A delta is stored from the
Linux time in the local flash to remember the changed time.
Command arguments:
<CLI> time –[get | set –date mm/dd/yyyy –time hh:mm:ss -[am|pm] ]
Where:
v mm
- Displays the month.
v dd - Displays the day.
v yyyy
- Displays the year.
v hh
- Displays the hour.
v mm
- Displays the minutes.
v ss
- Displays the seconds.
Examples:
<CLI> time –set –date mm/dd/yyyy –time hh:mm:ss –am|pm
Time set to mm/dd/yyyy hh:mm:ss am
<CLI> time –get
Current time is mm/dd/yyyy hh:mm:ss am
Chapter 8. Using the RAID Controller command line interface
77