IBM BladeCenter S SAS RAID Controller Module, Инструкция по установке и эксплуатации

Страница: 66 / 216

list drive
The
list drive
command creates output providing summary information about
each drive.
The drive bay number is
E:T
.
E:T
stands for [Enclosure]:[Tray], where
E
is the
enclosure number and
T
is the position of the hard drive. These positions/locations
begin with 1 and 1 is the uppermost drive.
The usage definitions are:
v
UNA - UnAssigned
v
GRP/SGR - Current/Stale Group Member
v
FOR - Foreign
v
GLS/SGS - Current/Stale Global Spare
v
NQ - Non-qualified
v
LCS/SLS - Current/Stale Local Spare
v
CBL/SCL - Current/Stale Auto-copy-back Local Spare
v
CBG/SCG - Current/Stale Auto-copy-back Global Spare
The state definitions are:
v OK - Healthy
v
M - Missing
v
P - Predicted Failure (PFA)
v
U - Unreliable
Note: M P U states can be combined.
v
PM - Path Missing
v
UP - UnReliable PFA
v
MP - Missing PFA
v MUP - Missing UnReliable PFA
v
MU - Missing UnReliable
v INI - Initialized
v
UNS - Unsupported (non-IBM device).
v
PM - Path Missing The drive is OK, but one or more paths are not usable.
v
IMD - Incompatible metadata The metadata on the drive is incompatible with
the firmware version. Assimilate the drive or upgrade the firmware.
v
UNF - Unsupported drive firmware version
Important: Drive assimilation a destructive procedure causing complete data
loss. Use this command only if your intention is to irrevocably erase all disk
data.
Command arguments:
<CLI> list drive
Example:
<CLI> list drive
________________________________________________________________________________________________
|Drive# |
E:T | SerialNo | Cap | Pool | Usage | State | Mount State | Ctl1 | Ctl2 | RPM |
|_______|______|______________|_______|______|_______|_______|_____________|______|______|______|
56
IBM SAS RAID Controller Module: Installation and User's Guide IBM BladeCenter S SAS RAID Controller Module