IBM BladeCenter S SAS RAID Controller Module, Инструкция по установке и эксплуатации

Страница: 19 / 216

Hardware features and specifications
This section provides a summary of the features and specifications for the IBM
BladeCenter S SAS RAID Controller Module.
The SAS RAID Modules support the following features:
v
6 internal 1X SAS 3.0 Gb host connectivity to 6 blade slots
v
2 internal 4X SAS 3.0Gb to 2 disk storage module (DSM) systems
v 1.0 Gb Ethernet for RAID management
v
10/100 Ethernet for Switch management
v
Serial SAS Protocol
v
Serial Management Protocol (SMP) as defined in the SAS specification
v
Fourteen internal x1 links to Blade servers
The IBM BladeCenter S chassis takes advantage of the features of the IBM
BladeCenter S SAS RAID Controller Module.
The following are standard features of the IBM BladeCenter S chassis:
v An Advanced Management Module
v
Two or more power modules
v Four fan modules
v
A media tray
You might receive additional features depending on what you ordered.
Table 3. Features
SAS RAID Module features
SAS RAID Module
maintainability SAS RAID Module
electrical specifications:
v
SAS RAID Module and
SAS expander
v Vitesse 7157
v
Diagnostics: Power-on
self-test (POST) is
performed on all
functional components.
Port operational tests
include internal, external,
and online tests.
v
User interface:
Light-emitting diode
(LED) indicators
v
Power source loading: 2
amps maximum at 12 V dc
v Heat output: 24 watts
maximum
v
Operating voltage: 12 V dc
v
Circuit protection:
Internally fused
Environmental: Fabric management –
methods: Dimensions
Chapter 1. Introduction
9