IBM BladeCenter QS20, Инструкция по установке и эксплуатации

Страница: 25 / 92

B lade server controls and LED s
This section describes the controls and L E Ds on the blade server.
P ower - control button: This button is behind the control-panel door. Press this
button to manually turn the blade server on or off.
N ote: The power-control button has effect only if local power control is enabled for
the blade server. Local power control is enabled and disabled through the
BladeCenter Management Module Web interface.
Figure 3. Power-control button
Chapter 2. Blade server power, controls, and indicators
11