IBM BladeCenter JS22, Руководство по диагностике и обслуживанию, Страница: 152 / 314

D1xx3y01 to D1xx3yF2 Service processor dump codes:
These D1xx3yxx service processor dump codes use the format:
D1 xx 3 yzz
, where xx
indicates the cage or node ID that the dump component is processing, y increments
from
0
to
F
to indicate that the system is not hung, and zz indicates the command
being processed.
Table 20 lists the progress codes that might be displayed during the power-on
self-test (POST), along with suggested actions to take if the system hangs on the
progress code. Only when you experience a hang condition should you take any of
the actions described for a progress code.
Table 20. D1xx3y01 to D1xx3yF2 checkpoints
v
If the system hangs on a progress code, follow the suggested actions in the order in which they are listed in
the Action column until the problem is solved. If an action solves the problem, you can stop performing the
remaining actions.
v
See Chapter 3, “Parts listing, Type 7998,” on page 235 to determine which components are CRUs and which
components are FRUs.
Progress code
Description
(Command Being Processed) Action
D1xx3y01 Get SCOM
1. Go to “Checkout procedure” on page 186.
2. Replace the system-board and chassis
assembly, as described in “Replacing the
Tier 2 system-board and chassis assembly”
on page 270.
D1xx3y02 Get scan ring
1. Go to “Checkout procedure” on page 186.
2. Replace the system-board and chassis
assembly, as described in “Replacing the
Tier 2 system-board and chassis assembly”
on page 270.
D1xx3y03 Get array values
1. Go to “Checkout procedure” on page 186.
2. Replace the system-board and chassis
assembly, as described in “Replacing the
Tier 2 system-board and chassis assembly”
on page 270.
D1xx3y04 Stop the clocks
1.
Go to “Checkout procedure” on page 186.
2.
Replace the system-board and chassis
assembly, as described in “Replacing the
Tier 2 system-board and chassis assembly”
on page 270.
D1xx3y05 Flush the cache
1. Go to “Checkout procedure” on page 186.
2. Replace the system-board and chassis
assembly, as described in “Replacing the
Tier 2 system-board and chassis assembly”
on page 270.
D1xx3y06 Get CFAM
1. Go to “Checkout procedure” on page 186.
2. Replace the system-board and chassis
assembly, as described in “Replacing the
Tier 2 system-board and chassis assembly”
on page 270.
138
JS22 Type 7998: Problem Determination and Service Guide