IBM BladeCenter JS12, Руководство по диагностике и обслуживанию

Страница: 271 / 318

Table 34. JS12 vital product data (continued)
Vital product data field Vital product data How to find this data
WorldWide port number
_________________________________ (12 characters)
lsvpd | grep WN
command
Brand B0 (B followed by zero)
lsvpd | grep BR
command
Perform the following procedure to enter VPD data into the management card.
1. Respond to the
Enter the Type Model Number (Must be 8 characters)
prompt
by typing
7998-60X
. Press Y to confirm the value.
2. Respond to the
Enter the Serial Number (Must be 7 characters)
prompt by
typing the serial number that is displayed in the Advanced Management
Module HW VPD panel. Press Y to confirm the value.
3. Respond to the
Enter System Unique ID (Must be 12 characters)
prompt by
typing the system unique ID (SUID) that is displayed when you use the
lsvpd
command at an operating-system prompt. Press Y to confirm the value.
4.
Respond to the
Enter WorldWide Port Number (Must be 12 characters)
prompt by typing the worldwide port number (WWPN) that is displayed when
you use the
lsvpd
command at an operating-system prompt. Press Y to confirm
the value.
5. Respond to the
Enter Brand (Must be 2 characters)
prompt by typing B0,
which is
B
followed by a zero. Press Y to confirm the value.
After you enter the VPD values, the blade server powers down the first
partition and reboots the service processor.
6. Start the JS12 blade server to continue using the blade server with the new
management card.
Obtaining a PowerVM Virtualization Engine system
technologies activation code
After replacing the management card and the vital product data (VPD), you must
reenter the activation code for the PowerVM Editions (formerly known as
Advanced POWER Virtualization) function to enable virtualization.
Before you perform this procedure, install the management card, as described in
“Installing the management card” on page 254.
Chapter 4. Removing and replacing blade server components
257