IBM BladeCenter HS23, Инструкция по установке и эксплуатации, Страница: 62 / 98

v
If you are managing the blade server from a remote location, see the IBM
BladeCenter Management Module User's Guide , IBM BladeCenter Management
Module Command-Line Interface Reference Guide , or IBM BladeCenter Serial over
LAN Setup Guide for information and instructions.
3. When the prompt
<F1> Setup
is displayed, press F1. If you have set an
administrator password, you must type the administrator password to access
the full Setup-utility menu. If you do not type the administrator password, a
limited Setup-utility menu is available.
4. Follow the instructions on the screen.
Setup utility menu
Use the Setup utility main menu to view and configure blade server configuration
data and settings.
The following menu items are on the Setup utility main menu. Depending on the
version of the Unified Extensible Firmware Interface (UEFI), some menu items
might differ slightly from these descriptions.
v
System Information
Select this choice to view information about the server. When you make changes
through other choices in the Setup utility, some of those changes are reflected in
the system information; you cannot change settings directly in the system
information. This choice is on the full Setup utility menu only.
–
System Summary
Select this choice to view configuration information, including the ID, speed,
and cache size of the microprocessors, machine type and model of the server,
the serial number, the system UUID, and the amount of installed memory.
When you make configuration changes through other options in the Setup
utility, the changes are reflected in the system summary; you cannot change
settings directly in the system summary.
– Product Data
Select this choice to view the system-board identifier, the revision level or
issue date of the firmware, the integrated management module and
diagnostics code, and the version and date.
This choice is on the full UEFI Setup Utility menu only.
v System Settings
Select this choice to view or change the server component settings.
–
Adapters and UEFI Drivers
Select this choice to view information about the adapters and UEFI drivers
installed in the blade server.
Note: Before you configure a UEFI-compatible device, you should update the
firmware for your blade server. See“Updating firmware and device drivers”
on page 54 for information about how to update the firmware for your blade
server.
To configure a UEFI-compatible expansion adapter, complete the following
steps:
1.
Select
Please refresh this page first
and press Enter.
2. Select the device driver that you want to configure and press Enter.
3.
When you have finished changing settings, press Esc to exit from the
program; select
Save to save the settings that you have changed.
– Processors
48
BladeCenter HS23 Types 7875 and 1929: Installation and User's Guide