IBM BladeCenter HS23, Инструкция по установке и эксплуатации, Страница: 61 / 98

Chapter 4. Configuring the blade server
Use this information for details about the configuration requirements of the blade
server.
This chapter describes the configuration requirements of the blade server. Before
you continue, make sure that the blade server has the latest version of firmware
code. For additional information, see “Updating firmware and device drivers” on
page 54.
The following configuration programs come with the blade server:
v
Setup utility
The Setup utility is used to change system settings, such as interrupt requests
(IRQ), date and time, and password. See “Using the Setup utility” for more
information.
v
LSI Logic Configuration Utility program
The LSI Logic Configuration Utility program is stored in the blade-server
firmware. Use it to set the device scan order and to set the storage drive
controller IDs. See “Using the LSI Configuration Utility program” on page 56 for
more information.
v IBM ServerGuide Setup and Installation CD
The ServerGuide program provides software-setup tools and installation tools
that are designed for the blade server. Use this CD during the installation of the
blade server to configure basic hardware features and to simplify the installation
of the operating system. For information about obtaining and using this CD, see
“Using the ServerGuide Setup and Installation CD” on page 52.
v
Preboot Execution Environment (PXE) boot agent utility program
The PXE boot agent utility program is part of the blade server firmware. Use it
to select the boot protocol and other boot options and to select a
power-management option. For information about using this utility program, see
“Setting the PXE boot protocol using the Setup utility” on page 54.
The IBM Remote Deployment Manager (RDM) Version 4.4 program is available for
purchase. You can use RDM to install a UEFI code update onto a blade server. For
the latest information about RDM, including which operating systems that RDM
supports and how to purchase the software, see http://www.ibm.com/systems/
management/ .
Using the Setup utility
Use these instructions to start the Setup utility.
To start the Setup utility, complete the following steps:
1. Turn on the blade server (see “Turning on the blade server” on page 14).
2.
Immediately give the blade server control of the BladeCenter unit shared
keyboard, video, and mouse ports.
v
If you are managing the blade server by using the BladeCenter system
console, press the KVM select button on the blade server (see “Blade server
controls and LEDs” on page 11 for information).
© Copyright IBM Corp. 2012
47