IBM BladeCenter HS22V 7871, Руководство по диагностике и обслуживанию

Страница: 105 / 258

3. If a dust cover is installed over the microprocessor socket, lift the dust cover
from the socket and store it in a safe place.
4.
Install the microprocessor in the microprocessor installation tool.
a. Remove the static-protective bag and the foam surrounding the bag from
the box.
b. Touch the static-protective bag that contains the new microprocessor to
any
unpainted surface on the BladeCenter chassis or any unpainted metal
surface on any other grounded rack component.
c. Carefully remove the microprocessor from the static-protective bag,
touching only the edges of the microprocessor.
d. If there is a plastic protective cover on the bottom of the microprocessor,
carefully remove it.
Microprocessor
Protective
cover
e. Twist the handle of the installation tool counterclockwise so that it is in the
open position.
f. Align the microprocessor alignment slots with the alignment pins on the
microprocessor installation tool and place the microprocessor on the
underside of the tool so that the tool can grasp the microprocessor
correctly.
Alignment
pins
Microprocessor
Alignment
pin slots
Installation tool
g. Twist the handle of the installation tool clockwise to secure the
microprocessor in the tool.
Note: You can pick up or release the microprocessor by twisting the
microprocessor installation tool handle.
5.
Install the microprocessor.
a. Remove the dust cover from the bottom of the microprocessor.
Chapter 5. Removing and replacing blade server components
89