IBM Ambra Achiever 5000 страница 41 Скачать руководство пользователя

Страница: 41 / 78

7. Each

essutils

command option displays a red or green system output. For any red system output,

try to debug the issue by using the system output, and rerun the command. For more information

about the

essutils

command error debug, see IBM Elastic Storage System 5000: Problem

Determination Guide.
If you have any general issues when you run the

essutils

flow, see Chapter 4, “Troubleshooting

(SSR tasks),” on page 41.

8. When you run the Check and validate various install parameters option, write down the installed

version in the “Installation worksheet” on page 45 so that the customer knows whether they need to

upgrade or not. To check whether a higher version of ESS 5000 is available, see IBM Fix Central.

Installation flow
Connect USB to Ethernet dongle to your laptop, if no direct Ethernet connection is available.
When the SSR connects a laptop to each server, an IP address will automatically be assigned

(10.111.222.102). The ping tests to SSR port “Checking I/O servers” on page 30 and “Checking ESS

management server and protocol nodes” on page 39 fail, set the following static IP address manually

and try again:
• IP address: 10.111.222.102
• Netmask: 255.255.255.252

Node combination rules

The node combination rules are as follows:
• If you are installing only an EMS and/or protocol node, skip to “Checking ESS management server and

protocol nodes” on page 39.

• If you are adding additional building blocks to an existing configuration, run only the flow “Checking I/O

servers” on page 30. Request the customer to provide a node already on the management network

that can be used to test ping.

• If you are adding additional protocol nodes to an existing configuration, run only the flow “Checking ESS

management server and protocol nodes” on page 39. Request the customer to provide a node already

on the management network that can be used to test ping.

Mixing ESS 3000, ESS 5000, and/or legacy ESS

IBM service support representatives (SSRs) must follow the following sequence of steps when they are

installing multiple solutions at one time:

1. Always start with WCII. WCII document has a table that shows what to do based on what the order is

whether they are racked or unracked. The WCII shows how to rack any Power-based nodes.

2. Use the IBM Elastic Storage System 5000: Hardware Installation Guide to do the following steps:

a) Complete the installation on Power nodes (including EMS), and then perform the installation

procedure on the ESS 5000 nodes.

b) After the racking is complete, start with the building block at the bottom, run the essutils tool on

each node, and set the management IP address and the HMC1 port.
Continue with any additional building blocks.

c) Check and configure the POWER9 protocol nodes and EMS, if applicable.

d) After the EMS is checked and IP addresses (Management, FSP IP, HMC1 port) is set, perform ping

tests from the EMS to all other Power nodes. If adding a building block this step is not applicable.

3. Use the instructions in the Elastic Storage System 3000 installation (SSR task) in the IBM Elastic

Storage System 3000: Hardware Planning and Installation Guide to check the nodes by using the

essutils tool, starting with the node that is at the bottom of the rack.

Chapter 3. Installing 29

Содержание Ambra Achiever 5000















































































Результаты поиска

Содержание Ambra Achiever 5000

Отзывы:

Похожие инструкции для Ambra Achiever 5000

Бренды по названию

Популярные бренды

IBM Ambra Achiever 5000, Руководство по оборудованию

Результаты поиска

Содержание Ambra Achiever 5000

Отзывы:

Похожие инструкции для Ambra Achiever 5000

Бренды по названию

Популярные бренды