IBM 8275-416, Руководство пользователя

Страница: 92 / 156

The following parameters apply to uploading and downloading of files.
File Type
The file types are:
For Download
v
Code (the default)
v
Configuration
For Upload
v
Configuration
v
Error log
v
System trace
v
Trap log (the default)
Upload or Download Mode
The mode is either XMODEM or TFTP. XMODEM is valid only when the file
transfer is initiated by the serial EIA 232 port. The default value is
XMODEM.
Start Transfer Now
Enter Yes or No. The value is No whenever the panel is initially displayed.
File Name
The file name can be up to 16 alphanumeric characters. The switch
remembers the last file name used. The default value is blank.
File path can be appended to the file name if the string is less than 17
characters. Otherwise, the File Path field will need to be used and the File
Name will be appended to the File Path as is. An example would be File
Path set to
c:\tftp\code\ and File Name set to e1r1v1.opr .
Note: File Name, File Path, and TFTP Server IP Address are applicable
only if the Transfer Mode is TFTP.
File Path
The directory path where the file is located or where it is to be uploaded to.
The switch remembers the last file path used. The default value is blank.
TFTP Server IP Address
The IP address of the server where the file is located. It is valid only when
the Transfer Mode is TFTP. The address is 4 decimal bytes ranging from 0
to 255. The default value is zeros.
Figure 60. Uploading a file from the switch
76
8275-416 User’s Guide